When Robert Goodliffe of Melbourne’s award winning Architectural firm, Clarke Hopkins and Clarke contacted Bluelab Design to manufacture and supply our Timber 90 for their Melbourne office expansion, we were excited to be included in CHC’s own project. Robert explained that the Office extension is situated at the back of...
Commercial/Public Buildings
Clarke Hopkins and Clarke’s Architectural timber lighting Office Fitout
Read MoreSustainable timber lighting for Frankston Tafe upgrade
Read MoreAs your specialist bespoke lighting designers and manufacturers, Bluelab Design proudly offers a variety of products to solve your lighting needs. We recently worked with Frankston Tafe to supply 60 sustainable Tasmanian Oak light fittings to be used throughout the Tafe’s hallways and breakout areas. We used the Timber 90...
LED Architectural Timber Lighting in Australia Post Melbourne
Read MoreNDY Light Melbourne office Designed the lighting for Australia Post Melbourne CBD office. Aviva Gunzberg from NDY used the Timber 965 within her lighting calculations for the meeting rooms coupled with downlights to the perimeter of each room. The T965 provides 356 lux with the T965 1200mm mounted at 2300mm...
Australian Catholic University Chapel
Read MoreIn 2012, Bluelab Design was appointed during the design process by Umow Lai. Bluelab Design worked with Woods Baggot Architects on conceptual designs and final drawings. The design changed minimally over the period of six months, with Bluelab Design helping the process with technical advice. Lowering gear was added so the...
Manningham Civic Centre
Read MoreBack in 2012, Manningham Civic Centre had come in over budget – so Bluelab Design offered a quality package within budget and the limited schedule. The extrusion fittings were all Dali-controlled and had special paint finishes to match the interior of the project.
Clayton Utz Board Room
Read MoreIn 2006, Bluelab Design was engaged to design and manufacture the boardroom lighting of law firm Clayton Utz in Melbourne’s Collins Street. Bluelab Design worked with renowned architectural firm Woods Baggot through the design stage. The fittings were square luminaire with both up and down lighting components. The frame was...
ANZ Contact Centre
Read MoreApps Electrics appointed Bluelab Design back in 2002 to make a series of specially designed lights for this project. The citric-coloured drums were one-meter diameter with a cluster of energy-saver lamps and parchment diffused base. The complicated design was the MR16 surface-mounted downlight. Heat with MR16 lamps was a major...